Skip to content
Write a review
UdemyLifestylePaid courseBeginner levelCertificate

Electrical Schematics (Industrial Controls) (Udemy.com)

Learn to read, understand & design power & control circuits. Foundational course to learn electrical wiring drawings.

4.4
4,022 reviews

Created by: Iconic Educademy

Last updated August 2022

icon
What you will learn

  • How to read, understand & design schematics
  • How to read control panel drawings
  • Concept of power and control circuits
  • Designing a circuit from scratch : Starter Circuits
  • Indication circuits
  • Local Remote & Auto Manual Operation
  • Basics of electrical interlocking
  • Metering circuits
  • Learn certain key switchgears
  • Electrical symbols
  • Cross-referencing and Designations in Schematics
  • Starter Circuit
  • Concept of NO & NC contacts
  • Contactor's Contact Numbering

How it compares

Against the other 418 rated Udemy courses in Lifestyle on CourseDuck:

  • Rating4.4 out of 5higher than 20% of them
  • Reviews4,022#19 of 419 by number of reviews
  • Length2.7 hoursshorter than 50% of them
  • Last updatedAugust 2022earlier than 58% of them

icon
Course Description

Electrical Schematics (Industrial Controls) is a basic course to start learning how to read, understand & design electrical schematics or electrical drawing (power and control circuits). We have covered various concepts that are required to design schematics. We start with very basics and eventually build on it.

We are also thrilled to share that this course has earned the high ranking of 9.4/10 by CourseMarks and ranks in the TOP 4% of 94,680 courses!

Some of the topics that you will come across are:

1) Basic details on schematics - What is schematic ? Where is it used ? Why is it needed?

2) Reading & Understanding Schematic - Title block, Disclaimer, Template, Designations, Cross-referencing, Legends etc.

3) Electrical Symbols & Switchgears - Electrical Symbols along with definition & images. Key technical details about switchgear like circuit  breakers, Contactors Isolators, Meters , Indicators & Protection devices

          a) Learn Off load & On Load devices

          b) Difference between isolators & circuit breakers

          c) NO & NC contacts

          d) Power & Auxiliary Contactor - contact numbering, advantages & limitations etc.

          e) Instrument Transformers

          f) Protection Devices

4) Designing circuit - in a step by step method - DOL Motor Starter Circuit

  • Control of motors - Star / Stop, Trip

  • Hold-on Contact

  • Indication circuits

  • Local remote

  • Auto manual operations

5) Basics of electrical interlocking

6) Basics of Metering Circuits

7) Application in Switchboards and practice questions.
Read More Beginner Beginner Level product length iconTime: 2.7h

icon
Udemy Discount

The discount is applied through our link. Open the course from here and Udemy's current promotional price is applied at checkout on most courses, no code to type.

Get the Udemy discount

Some courses are excluded from Udemy's promotions. If the price does not drop, clear your browser cookies and use the button again.

icon
Instructor Details

Iconic Educademy

We, at Iconic Techno Solutions Pvt. Ltd., are providers of Engineering Automation Solution to switchboard manufacturers - We provide costing, designing and manufacturing software solutions to electrical panel builders.

We are team of highly experienced electrical engineers who have worked in the switchboard manufacturing industry for almost 33 years and have now completed 15 years in IT based solution for the switchboard industry.

We have extensive hands on experience and we have worked with some prominent companies like  Siemens, Schneider, L&T, ABB, LS, Legrand, etc. We have not only gotten opportunity to work on projects for the Indian market but also for the international market.

During all these years, we worked with different people, with different skill set, and we have got the job done. We taught them , trained them and guided them throughout but without any formal training procedure or material.

What we have realized that there a basic gap that needs to be filled between college education and industry, and hence we have taken this step to start Iconic-educademy, wherein we don't only what to help freshers and new comers who join our organisation but also help everyone out their looking to fill this gap wrt. practical relevance in the working environment.

Read More

icon
More courses by Iconic Educademy

$69.99

$54.99

All courses by Iconic Educademy

icon
More Lifestyle courses

$49.99

$24.99

$59.99

$69.99

$74.99

$79.99

All Lifestyle courses

icon
Reviews

4.4

4,022 ratings on Udemy

Select a bar to show only those reviews.Select the bar again to show every rating.

Write a review

By Kulwa Masanja Isenge on 8/25/2026

It is a nice course for the basics of reading, understanding, and designing schematics. I gained the basics, and now I'm confident moving on to learning more complex designs and schematics.

By Chris on 7/27/2026

It's honestly what I needed to understand the industrial controls version of schematics and even though NEMA is not being discussed, I believe it was a good decision to focus on IEC, since it is the international standard. The next thing I will look for is the physical wiring aspect. Great training to help me understand what the symbols mean and why it operates.

By Vesa Kazazi on 6/20/2026

I might say that this was a great course. It's intended for beginners, but the way of explaination is really clear and it starts from simple point to more difficult one. Really congrats on the teacher.

By Christian Luis Lazarde Sr on 5/24/2026

great for refreshing your mind and keeping a fresh trace of concept building on schematics & symbols/legends

By Nguyen Thanh on 5/18/2026

Awful pronunciation for those who speak English as a second language. I wonder if she really understands what she is saying.

By Irvin Vasquez on 4/20/2026

Makes me pay attention due to the difficulty without having to be way too complicated. Just the right amount of complexity to still pay attention at the same time of not being totally lost.

By Magdalena Grobelska on 3/16/2026

everything is very well expalined, in a detained way and step by step method. i feel I-m learnign very quickly!

By Michael Rafferty on 12/25/2025

I loved it. I have been wanting to learn this for a long time and in just that little part i have already learned new things. I am looking forward to the rest of the course.

By Mark Crooks on 10/6/2025

could you send my assign questions for this course i enjoyed it and want learn more before moving foward on next course thank you

By Anonymized User on 9/24/2025

Yes, it definitely fits my work and duties as I've many areas of work is related to electrical and understanding basics is very good as well as it's exciting and fun to know. Thank you very much for this opportunity and I will want to excel further on the next stage of switching areas of electricity.

Showing all 10 reviews on CourseDuck

Read all 4,022 reviews on Udemy

icon
Quality Score

No CourseDuck member has rated this course yet. Taken it? Give each part a thumbs up or down.

Content Quality
/
Video Quality
/
Qualified Instructor
/
Course Pace
/
Course Depth & Coverage
/

Overall Score : 88 / 100

Electrical Schematics (Industrial Controls)
Visit course on Udemy Write a review
  • Video Duration: icon 2.7h
  • Price: $89.99
  • Provider: icon Udemy
  • Updated: icon August 2022
  • Level: Beginner Beginner
  • Language: icon English
  • Certificate: icon Yes
30-day money-back guarantee on most paid courses

Udemy Coupon Price Tracker

Udemy price history

For any issues or feature requests please email CourseDuck's Co-Founder at mkuhlman12@gmail.com