Learn Risk Analysis, Evaluation & Assessment - from A to Z (Udemy.com)
Became an expert of the fundamental tecniques and tools in risk management and assessment (PHA, FTA, FMEA, HAZOP, HACCP)
Created by: Marco CATANOSSI
Last updated April 2020
What you will learn
- Perform a risk analysis, evaluation and assessment
- Use standard risk assessment tools like FMEA, FTA, PHA, HAZOP and HACCP
- Understand the various techniques of risk analysis
- Use the Failure Mode and Effects Analysis FMEA technique
- Use the Fault Tree Analysis FTA technique
- Use the Hazard Analysis and Critical Control Point HACCP technique
- Use the Preliminary Hazard Analysis PHA technique
- Use the Hazard and Operability Study HAZOP technique
- Adapt and use the risk analysis techniques in a flexible way to virtually every field of work
How it compares
Against the other 1,210 rated Udemy courses in Business on CourseDuck:
- Rating4.5 out of 5higher than 46% of them
- Reviews7,980#104 of 1,211 by number of reviews
- Length1 hourshorter than 88% of them
- Last updatedApril 2020earlier than 90% of them
Course Description
"Good pace and solid information", Bobby
"Very nice course for beginner introduction to risk analysis. A good point to start", Angelos
Besides risk management, risk assessment is demanded in many field, like product development, process control, project management, business plans and so on. Even a process as simple as delivering a meal in a business activity, is subject by law to a particular risk assessment.
However, the theoretical basis is almost the same for every field, even though there are many risk assessment tools available for this objective.
In this course, we will cover both the common basis and the specific tools. More in details, with respect to the general aspects of risk assessment, we will see:
- risk analysis,
- risk estimation both qualitative, semi-quantitative and numerical
- risk evaluation and control measures
Then we will see the most used techniques:
- Preliminary Hazard Analysis (PHA)
- Fault Tree Analysis (FTA)
- Fault Mode and Effects Analysis (FMEA)
- Hazard and Operability Study (HAZOP)
- Hazard Analysis and Critical Control Point (HACCP)
Once learned the above concepts, we will see the complete risk assessment cycle, and which techniques to use during specific phases of a development process.
Both the general part and the particular techniques lessons are fitted with examples and downloadable excel worksheets.
At the end of the course, you will be able to master both the basic concepts and specific techniques, and you will be able to apply and adapt this knowledge to your field of interest.
HAPPY LEARNING!!!
Instructor Details
- 4.5 Rating
7,980 Reviews
Marco CATANOSSI
Marco Catanossi lives and works in Italy.
He has a MSc in electronics engineering, is a Certified professional in Engineering, and he is an expert in product legislation, international standards and certifications, helping many companies from different countries to successfully put their product on the market and reach safety and quality goals.
The Author has also experience as assessors on product legislation and international standards on behalf of the Court of Justice and he is member of the European Union engineering panel for innovation projects evaluation.
Since 2008, Marco has built a consulting business helping manufacturers from different fields (from medical devices to machinery and toys) to meet regulatory and technical requirements worldwide, and to certify their organization according to management standards, like ISO 9001 and ISO 13485.
He is a dedicated professional with a high specialization in products legislation (including electrical/electronics) and certifications (both for quality like ISO 9001 and for products like IEC 60601, IEC 60335, etc.), a deep insight in product liability and a strong practical approach to product engineering and design.
More courses by Marco CATANOSSI
Risk Management: Master FMEA/FMECA & Criticality from A to Z (2020)
4.6 (2,028 Reviews)
Provider: Udemy
Time: 2h
$79.99
PCB/Electronics: Thermal Management, Cooling and Derating (2020)
4.3 (1,416 Reviews)
Provider: Udemy
Time: 1.5h
$15.99
Process Validation (101) in ISO 9001/Quality/Risk Management (2020)
3.8 (537 Reviews)
Provider: Udemy
Time: 1h
$44.99
Electrical, Electronics and PCB Design Safety & Compliance (2020)
4.2 (401 Reviews)
Provider: Udemy
Time: 3h
$49.99
More Business courses
Hiring and Interview Skills to Recruit Top Talent as Manager (2026)
5.0 (267 Reviews)
Provider: Udemy
Time: 5.9h
$10.99
Directing the Actor: A USC course with Nina Foch (2016)
4.9 (1,379 Reviews)
Provider: Udemy
Time: 4h
$13.99
Lean Management: Just-In-Time JIT Certification (Accredited) (2026)
4.9 (1,219 Reviews)
Provider: Udemy
Time: 2.2h
$13.99
LinkedIn Marketing And Personal Branding Masterclass (2026)
4.9 (137 Reviews)
Provider: Udemy
Time: 1.4h
$19.99
Personal Branding Mastery: Elevate Your Career and Business (2026)
4.9 (134 Reviews)
Provider: Udemy
Time: 3.9h
$19.99
Reviews
By Dan Burke on 6/8/2026
This was a better-than-average course. The slides were engaging, and instructor Marco Catanossi was very knowledgeable about the topic of risk analysis. Each term was well defined and explained transparently. While the downloadable Excel workbooks helped with some of the key concepts, having the option of downloading visual aids in a format like PDF also would have been helpful to understand them in pictures. Great course otherwise, and an excellent introduction to the topic of risk analysis.
By Jerry Chen on 5/12/2026
The course is delivered in a concise manner, and covers various key practical topics that are very useful in risk assessment. Time well spent.
By Jordane Delahaye on 6/6/2025
This was a well laid out course, easy to follow with just the right amount of detail and guidance. The course may be short and simple but I think the skill you learn will be useful your entire life, even in your personal life. I also appreciated being able to sharpen my ear on the Italian accent. 2-for-1 learning!
By Ahmed Aref AlKooheji on 3/29/2023
Great course for understanding the very basics of risk analysis for anyone who does not have a background in the field. Only comment I would have would be to include more practical examples to solve as the course focuses mainly on the theory than it does the practicality. Although, one would have the understanding to practice on their own due to the teacher's clear and concise way of teaching, more practice "within the course" would, in my opinion, help build up the confidence to apply these fundamentals in the real world.
By Maggie Howe on 11/15/2020
good introduction to tools and terms
By Przemysaw Puchalski on 11/15/2020
Nice explained, good start for risk officers.
By Ankit Saini on 11/15/2020
Thanks you for giving us these tools
By Emmanuel Baah-Frempong on 11/15/2020
Good fundamentals
By Vinod Samantrai on 11/15/2020
it is good to get the risk knowledge in one go.
By Brandy Henderson on 11/8/2020
Unable to understand the narrator clearly. Other than that, very informative.
By Kristina Mandic on 11/8/2020
Overall, it was good! I appreciated the material that you can download and the fact and the fact that there were some very basic examples.
However, considering that this was a course for beginners (meaning people who lack this knowledge and expertise) there were to many "boring" and serious definitions. It was sometimes hard to follow. Can you simplify the definition even more?
For example, once you draw out how all those concepts/terms form the general picture it was much easier to understand. Also, perhaps it would be good to have an even more concrete/short/simple outline of the key points you will discuss at the mere beginning of the course.
By Ankit Kaushik on 10/27/2020
Explanation is nice.
Quality Score
No CourseDuck member has rated this course yet. Taken it? Give each part a thumbs up or down.
Overall Score : 90 / 100










