Skip to content
Write a review
UdemyArduinoPaid courseAll LevelsCertificate

Digital Electronics and Circuits (Udemy.com)

Hands-on course spanning over 11+ hours for in-depth learning/practice

4.1
391 reviews

Created by: Robin Garg

Last updated August 2020

icon
What you will learn

  • 11+ hours hands-on course explaining Digital Electronics concepts in depth
  • Thoroughly Learn, and Hone your Digital Electronics knowledge
  • Prepare for a Job in the IT/Semiconductor Industry
  • Prepare for Competitive Entrance Exams requiring Digital Electronics Knowledge

How it compares

Against the other 295 rated Udemy courses in Arduino on CourseDuck:

  • Rating4.1 out of 5higher than 19% of them
  • Reviews391#79 of 296 by number of reviews
  • Length11.1 hourslonger than 82% of them
  • Last updatedAugust 2020earlier than 78% of them

icon
Course Description

Section 1: Introduction

Section 2: Few Basic Concepts

+Signals, Systems, Elements
+Integrated Circuit Families, Characteristics, and Levels
+Number Systems and Codes

Section 3: Boolean Expressions, Minterms, Maxterms, Circuit Minimization

+Boolean Expressions, Operator Precedence, and Boolean Laws
+Basic Gates, Truth Tables, Maxterms, Minterms
+K Maps 1
+K Maps 2
+Quine McCluskey Method

Section 4: Combinational Logic and Circuits

+Universal Gates (NAND and NOR)
+NMoS, PMoS, and CMoS Designs
+EX-OR and EX-NOR Gates (Odd and Even Functions)
+Adders (Binary, Half, Full, 4-bit)
+Subtraction, Ripple Carry Adders and Carry Lookahead Generators
+Decoders and Encoders
+Multiplexers and Demultiplexers

Section 5: Sequential Logic and Circuits

+Concept of Memories, and Latches
+Flip Flops (Latches to FF conversion, types of FFs, Setup and Hold Times)
+Analysis of Sequential Circuits (Mealy and Moore Machines)
+Design of Sequential Circuits
+State Reduction
+Registers
+Counters
+Ring Counter and Johnson Counter

Section 6: Miscellaneous Concepts and Problem Solving

+Metastability
+Problem Solving 1 (Design Conversions using MUX)
+Problem Solving 2 (Flip Flop Conversions)
+Problem Solving 3 (Sequence Recognizer Circuit)
* New lectures will be added based upon popular user feedback and request.
Read More All Levels All Levels product length iconTime: 11.1h

icon
Udemy Discount

The discount is applied through our link. Open the course from here and Udemy's current promotional price is applied at checkout on most courses, no code to type.

Get the Udemy discount

Some courses are excluded from Udemy's promotions. If the price does not drop, clear your browser cookies and use the button again.

icon
Instructor Details

Robin Garg

Robin is a Design Verification Architect, specializing in Functional Verification, Power Aware Design Verification, UPF Design, and DV Left Shift TFMs. He has extensive hands-on experience working with teams and stakeholders across the globe. He has successfully lead (first pass Silicon) end-to-end product verification lifecycle at Subsystems and SoC levels for multiple generations of Server, Client Graphics, Mobile, and IoT products.

Robin has worked on NUVIA SoCs, Oryon CPUs, Intel GPUs, ARM Subsystems, and Qualcomm Modem/Mobile SoCs. As an early employee at NUVIA (now Qualcomm), he worked across DV, TFM, EDA, Design; built functional and Low Power Design/DV infrastructure ground up at IP, SS, and SoC levels; and was instrumental in developing multiple left shift methodologies.

Robin is a respected voice in the semiconductor industry. He is a published Author (bestseller book), and Instructor of multiple courses (among Top 3% worldwide). He is a Steering Committee Member for DVCON India, and International VLSI D Conference, and has multiple Technical Paper and Poster Presentations spanning across DV.


Views expressed on this platform are Robin’s personal views and not of his employer!

Read More

icon
More Arduino courses

Free

$74.99

$89.99

$69.99

$79.99

$159.99

All Arduino courses

icon
Reviews

4.1

391 ratings on Udemy

Select a bar to show only those reviews.Select the bar again to show every rating.

Write a review

By Joncarlo Fridholm on 12/3/2025

Content good but difficult to hear. Volume maxed with headphones but environment outside of headphones is also a little noisy so, might be ok in quiet place.

By Javier Rivas on 8/15/2025

The secuencial way in witch the course is developed make it easier to understand.

By Anonymized User on 5/2/2025

This was a refresher for me professionally, but it was good to review the material.

By Anonymized User on 4/21/2025

yes it is. A good course to pursue my study in digital electronics.

By Olivier AUPOIX on 5/2/2024

Too much time lost on writing everything manually : could have been optimized with some parts being pre-filled

By Raymond Daly on 10/4/2023

Found the course easy enough to follow and basics were well explained

By Chase Shoberg on 10/26/2021

I needed a refresher course prior to a digital design job interview after having graduated College a few years ago. These lectures did a great job of explaining the various logic circuits in an appropriate amount of time.

By Rohan on 3/25/2021

You could have gone much deeper into the concepts.

By Surya Chandran on 10/23/2020

The course covered almost every topics and I liked the white board-esque approach.

By Monu on 8/10/2020

Liked whiteboard approach. Felt like classroom and got good understanding.

Showing all 10 reviews on CourseDuck

Read all 391 reviews on Udemy

icon
Quality Score

No CourseDuck member has rated this course yet. Taken it? Give each part a thumbs up or down.

Content Quality
/
Video Quality
/
Qualified Instructor
/
Course Pace
/
Course Depth & Coverage
/

Overall Score : 82 / 100

Digital Electronics and Circuits
Visit course on Udemy Write a review
  • Video Duration: icon 11.1h
  • Price: $10.99
  • Provider: icon Udemy
  • Updated: icon August 2020
  • Level: All Levels All Levels
  • Language: icon English
  • Certificate: icon Yes
30-day money-back guarantee on most paid courses

Udemy Coupon Price Tracker

Udemy price history

For any issues or feature requests please email CourseDuck's Co-Founder at mkuhlman12@gmail.com