Skip to content
Write a review
UdemyArduinoPaid courseAll LevelsCertificate

PLC, Arduino and HMI Projects over Modbus TCP: From Scratch (Udemy.com)

Design from A-Z control projects using Arduino, Soft PLC, HMI, VFD, ModBus TCP and Electrical panel with full simulation

4.6
610 reviews

Created by: Mouhammad Hamsho

Last updated September 2023

icon
What you will learn

  • Integrating an Arduino with Soft-PLC (CodeSYS)
  • Integrating Arduino with HMI supporting ModBus TCP
  • Basic motor driver control (VFD) using Arduino
  • Simulate industrial automation projects using Arduino
  • Design two full industrial automation projects from scratch
  • Interfacing industrial sensors with Arduino
  • Using cutting edge software to design automation projects
  • Ladder logic skills
  • Learning VFD setup

How it compares

Against the other 295 rated Udemy courses in Arduino on CourseDuck:

  • Rating4.6 out of 5higher than 77% of them
  • Reviews610#54 of 296 by number of reviews
  • Length7.3 hourslonger than 62% of them
  • Last updatedSeptember 2023more recently than 53% of them

icon
Course Description

This course provides hands-on Step by Step experience to integrate, Arduino, PLC and HMI using Modbus TCP by implementing real industrial projects.
Real projects will be designed step by step to help you grasp the concepts.
By the end of this course, you will be able to integrate various technologies to control industrial automation projects in multiple ways, like using Soft-PLC with Arduino and using HMI with Arduino.
The materials also contain a lot of videos that will teach you various skills. Stuff like, Ladder logic programming, HMI design, VFD driving and many other cool lectures that you can use to expand the Arduino integration in real industrial automation projects.
You will use technologies and brands like :
ArduinoCodeSysSchneider ElectricModbus TCPVFD (Industrial motor drivers)And the best part is you will be able to simulate and integrate most of the things without having to buy any expensive industrial automation hardware. However, if you plan to buy the equipment, then you will be able to design your projects since this course will walk you through Programming and schematic of two complete integration projects.
This course will be based on the famous industrial protocol Modbus TCP, where you will learn how to use it in integrating almost any Modbus TCP supported device with Arduino, and just to note, this protocol supported by over 70% of the industrial automation devices and equipment.
What you need is:
Arduino UNOArduino Ethernet shieldPC/Laptop with Windows Some wires and potentiometerOptional (8-CH Arduino Relay external card with 5v 700mA minimum power supply) All software we will use are free so you don't need to worry about obtaining any of them, all the links will be provided, noting that these are very highly professional software used by the biggest companies around the world and are by no mean poorly developed ones.
Skills you will learn in this course:
Arduino Integration with CodeSys Soft PLC systemsArduino integration with HMI Learning how to use Modbus TCP with multiple equipmentBasic VFD driving using ArduinoDesign HMI screens in two different software Designing in Ladder LogicHandling Classical VFD devices (Industrial motor drivers) Using Arduino to simulate small size industrial automation projectsThe two projects designed from scratch in this course w are designed step by step. And besides, by the end of each project, an electrical panel-based demonstration video will be shown to let you see the result not only in simulation but also with real industrial automation electrical hardware.
An Arduino is NOT a replacement for a PLC system, though it can be deployed for small scale projects.
Who this course is for:
Any enthusiast about expanding Arduino capabilities to real applicationsAnyone curious about integrating arduino with HMI and PLCArduino HobbyistIndustrial Automation DesignersComputer engineersElectrical and Electronics engineersControl EngineersCommunication Engineers
Read More All Levels All Levels product length iconTime: 7.3h

icon
Udemy Discount

The discount is applied through our link. Open the course from here and Udemy's current promotional price is applied at checkout on most courses, no code to type.

Get the Udemy discount

Some courses are excluded from Udemy's promotions. If the price does not drop, clear your browser cookies and use the button again.

icon
Instructor Details

Mouhammad Hamsho

Ich bin Ingenieur fr Elektrotechnik und Elektronik mit einer Leidenschaft fr Programmierung und Systemintegration.
Ich habe industrielle Automatisierungsprojekte entworfen, angefangen von kleinen Maschinen bis hin zu groen Produktionslinien und automatisierten Fabriken. Ich bin erfahren in der Programmierung der Schalttafeln fr SPS / DCS, HMI und SCADA.
Ich habe Erfahrung mit Programmierplattformen von Schneider, ABB, Siemens, Delta und AllenBradley.

ICH UNTERRICHTE NICHTINGENIEURE NACH DEN BESTEN KRFTEN IN TECHNISCHEN KONZEPTEN UND KONSTRUKTIONEN.
Ich glaube, dass Sie durch bung alles lernen knnen, unabhngig von Ihrem bevorzugten.

Read More

icon
More courses by Mouhammad Hamsho

$19.99

$10.99

$12.99

$84.99

$84.99

$10.99

All courses by Mouhammad Hamsho

icon
More Arduino courses

Free

$74.99

$89.99

$69.99

$79.99

$159.99

All Arduino courses

icon
Reviews

4.6

610 ratings on Udemy

Select a bar to show only those reviews.Select the bar again to show every rating.

Write a review

By Carlo Falardo on 11/15/2020

It is a very big help on me to uderstand more on how to build HMI and programming a PLC. Thank you for creating this course.

By Fredrik Hedin on 10/27/2020

It is easy to follow.

By Patrick on 10/7/2020

Excellent match for me. I was wondering about a few people that I would refer to this course and was wondering about some of terms and if they would understand them. HMI, Modbus, TCP/IP and what these acronyms stand for

By Arun Dayal Udai on 9/21/2020

I think I am really going to learn something new.
Lectures are loud and clear.

By Nedzad Drndic on 9/7/2020

great.. well done..

By Akinlawon Moshood Adegoke on 8/26/2020

This engineer is awesome and excellent, he breaks everything down conveniently, I love it.

By Steven Siao Wong on 8/22/2020

Well structured, easy to follow and understand.. thanks.

By Hamayoon Sangi on 8/18/2020

Explained every part explicitly and comprehensively. Thank you for the lectures.

By Daniel Okyere Mensah on 8/2/2020

Nope. The tutor automatically assumes that learners are already experts at the course and hence moves too fast

By Sulaiman Alhasawi on 7/24/2020

simple and clear

By Jacques on 7/15/2020

Yes, it is so far recapping my knowledge and preparing me for the next steps

By Tihomir Nad on 7/5/2020

It is excelent course for my level of knowledge.

Showing 12 of 58 reviews

icon
Quality Score

No CourseDuck member has rated this course yet. Taken it? Give each part a thumbs up or down.

Content Quality
/
Video Quality
/
Qualified Instructor
/
Course Pace
/
Course Depth & Coverage
/

Overall Score : 92 / 100

PLC, Arduino and HMI Projects over Modbus TCP: From Scratch
Visit course on Udemy Write a review
  • Video Duration: icon 7.3h
  • Price: $84.99
  • Provider: icon Udemy
  • Updated: icon September 2023
  • Level: All Levels All Levels
  • Language: icon English
  • Certificate: icon Yes
30-day money-back guarantee on most paid courses

Udemy Coupon Price Tracker

Udemy price history

For any issues or feature requests please email CourseDuck's Co-Founder at mkuhlman12@gmail.com